# Inferential Statistics

# Populations and samples

- In statistics, we often rely on a sample --- that is, a small subset of a larger set of data --- to draw inferences about the larger set.
- The larger set is known as the population from which the sample is drawn.
- A sample is typically a small subset of the population.
- In the case of voting attitudes, we would sample a few thousand Americans drawn from the hundreds of millions that make up the country.
- In choosing a sample, it is therefore crucial that it not over-represent one kind of citizen at the expense of others. * For example, something would be wrong with our sample if it happened to be made up entirely of Florida residents.
- If the sample held only Floridians, it could not be used to infer the attitudes of other Americans.
- The same problem would arise if the sample were comprised only of Republicans.
- Inferential statistics are based on the assumption that sampling is random.
- We trust a random sample to represent different segments of society in close to the appropriate proportions (provided the sample is large enough; see below).

## Example 1

You have been hired by the National Election Commission to examine how the American people feel about the fairness of the voting procedures in the U.S. Whom will you ask?

- It is not practical to ask every single American how he or she feels about the fairness of the voting procedures.
- Instead, we query a relatively small number of Americans, and draw inferences about the entire country from their responses.
- The Americans actually queried constitute our sample of the larger population of all Americans.
- The mathematical procedures whereby we convert information about the sample into intelligent guesses about the population fall under the rubric of inferential statistics.

## Example 2

We are interested in examining how many math classes have been taken on average by current graduating seniors at American colleges and universities during their four years in school.

- Whereas our population in the last example included all US citizens, now it involves just the graduating seniors throughout the country.
- This is still a large set since there are thousands of colleges and universities, each enrolling many students. (New York University, for example, enrolls 48,000 students.)
- It would be prohibitively costly to examine the transcript of every college senior.
- We therefore take a sample of college seniors and then make inferences to the entire population based on what we find.
- To make the sample, we might first choose some public and private colleges and universities across the United States.
- Then we might sample 50 students from each of these institutions.

Suppose that the average number of math classes taken by the people in our sample were 3.2.

- Then we might speculate that 3.2 approximates the number we would find if we had the resources to examine every senior in the entire population.
- But we must be careful about the possibility that our sample is non-representative of the population.
- Perhaps we chose an overabundance of math majors, or chose too many technical institutions that have heavy math requirements.
- Such bad sampling makes our sample unrepresentative of the population of all seniors.

## Example 3

A substitute teacher wants to know how students in the class did on their last test.

- The teacher asks the 10 students sitting in the front row to state their latest test score.
- He concludes from their report that the class did extremely well.

*What is the population?*

The sample is made up of just the 10 students sitting in the front row.

*What is the sample? *

The population consists of all students in the class.

*Can you identify any problems with choosing the sample in the way that the teacher did?*

- The sample is not likely to be representative of the population.
- Those who sit in the front row tend to be more interested in the class and tend to perform higher on tests.
- Hence, the sample may perform at a higher level than the population.

## Example 4

A coach is interested in how many cartwheels the average college freshmen at his university can do.

- Eight volunteers from the freshman class step forward.
- After observing their performance, the coach concludes that college freshmen can do an average of 16 cartwheels in a row without stopping.

*What is the population?*

the population is the class of all freshmen at the coach's university.

*What is the sample? *

The sample is composed of the 8 volunteers.

*Can you identify any problems with choosing the sample in the way that the teacher did?*

- The sample is poorly chosen because volunteers are more likely to be able to do cartwheels than the average freshman; people who can't do cartwheels probably did not volunteer!
- In the example, we are also not told of the gender of the volunteers.
- Were they all women, for example?
- That might affect the outcome, contributing to the non-representative nature of the sample (if the school is co-ed).

# Simple Random Sampling

- Researchers adopt a variety of sampling strategies.
- The most straightforward is simple random sampling.
- Such sampling requires every member of the population to have an equal chance of being selected into the sample.
- In addition, the selection of one member must be independent of the selection of every other member.
- That is, picking one member from the population must not increase or decrease the probability of picking any other member (relative to the others).
- In this sense, we can say that simple random sampling chooses a sample by pure chance.

## Example

A research scientist is interested in studying the experiences of twins raised together versus those raised apart.

- She obtains a list of twins from the National Twin Registry, and selects two subsets of individuals for her study.
- First, she chooses all those in the registry whose last name begins with Z.
- Then she turns to all those whose last name begins with B.
- Because there are so many names that start with B, however, our researcher decides to incorporate only every other name into her sample.
- Finally, she mails out a survey and compares characteristics of twins raised apart versus together.
- The population consists of all twins recorded in the National Twin Registry.

It is important that the researcher only make statistical generalizations to the twins on this list, not to all twins in the nation or world.

- That is, the National Twin Registry may not be representative of all twins.
- Even if inferences are limited to the Registry, a number of problems affect the sampling procedure we described.
- For instance, choosing only twins whose last names begin with Z does not give every individual an equal chance of being selected into the sample.
- Moreover, such a procedure risks over-representing ethnic groups with many surnames that begin with Z.
- There are other reasons why choosing just the Z's may bias the sample.
- Perhaps such people are more patient than average because they often find themselves at the end of the line!
- The same problem occurs with choosing twins whose last name begins with B.
- An additional problem for the B's is that the “every-other-one” procedure disallowed adjacent names on the B part of the list from being both selected.
- Just this defect alone means the sample was not formed through simple random sampling.

# Sample size matters

- The definition of a random sample is a sample in which every member of the population has an equal chance of being selected.
- This means that the sampling procedure rather than the results of the procedure define what it means for a sample to be random.
- Random samples, especially if the sample size is small, are not necessarily representative of the entire population.
- Only a large sample size makes it likely that our sample is close to representative of the population.
- For this reason, inferential statistics take into account the sample size when generalizing results from samples to populations.

- Example

- If a random sample of 20 subjects were taken from a population with an equal number of males and females, there would be a nontrivial probability (0.06) that 70% or more of the sample would be female.
- Such a sample would not be representative, although it would be drawn randomly.

# More complex sampling

Sometimes it is not feasible to build a sample using simple random sampling. To see the problem, consider the fact that both Dallas and Houston are competing to be hosts of the 2012 Olympics. Imagine that you are hired to assess whether most Texans prefer Houston to Dallas as the host, or the reverse. Given the impracticality of obtaining the opinion of every single Texan, you must construct a sample of the Texas population. But now notice how difficult it would be to proceed by simple random sampling. For example, how will you contact those individuals who don’t vote and don’t have a phone? Even among people you find in the telephone book, how can you identify those who have just relocated to California (and had no reason to inform you of their move)? What do you do about the fact that since the beginning of the study, an additional 4,212 people took up residence in the state of Texas? As you can see, it is sometimes very difficult to develop a truly random procedure. For this reason, other kinds of sampling techniques have been devised. We now discuss two of them.

# Random Assignment

In experimental research, populations are often hypothetical. For example, in an experiment comparing the effectiveness of a new anti-depressant drug with a placebo, there is no actual population of individuals taking the drug. In this case, a specified population of people with some degree of depression is defined and a random sample is taken from this population. The sample is then randomly divided into two groups; one group is assigned to the treatment condition (drug) and the other group is assigned to the control condition (placebo). This random division of the sample into two groups is called random assignment. Random assignment is critical for the validity of an experiment. For example, consider the bias that could be introduced if the first 20 subjects to show up at the experiment were assigned to the experimental group and the second 20 subjects were assigned to the control group. It is possible that subjects who show up late tend to be more depressed than those who show up early, thus making the experimental group less depressed than the control group even before the treatment was administered. In experimental research of this kind, failure to assign subjects randomly to groups is generally more serious than having a non-random sample. Failure to randomize (the former error) invalidates the experimental findings. A non-random sample (the latter error) simply restricts the generalizability of the results.

# Stratified Sampling

Since simple random sampling often does not ensure a representative sample, a sampling method called stratified random sampling is sometimes used to make the sample more representative of the population. This method can be used if the population has a number of distinct "strata" or groups. In stratified sampling, you first identify members of your sample who belong to each group. Then you randomly sample from each of those subgroups in such a way that the sizes of the subgroups in the sample are proportional to their sizes in the population. Let's take an example: Suppose you were interested in views of capital punishment at an urban university. You have the time and resources to interview 200 students. The student body is diverse with respect to age; many older people work during the day and enroll in night courses (average age is 39), while younger students generally enroll in day classes (average age of 19). It is possible that night students have different views about capital punishment than day students. If 70% of the students were day students, it makes sense to ensure that 70% of the sample consisted of day students. Thus, your sample of 200 students would consist of 140 day students and 60 night students. The proportion of day students in the sample and in the population (the entire university) would be the same. Inferences to the entire population of students at the university would therefore be more secure.